Qingdao Zhaoyuqi Machinery Co., Ltd.

  • Jan08

    Ductile Iron Check Valve (Swing Type)

    A ductile iron check valve is a self-acting, one-way valve that allows fluid to flow in a single direction and closes automatically when the flow reverses, preventing backflow that could damage pumps, contaminate media, or flood upstream equipment. Unlike gate or globe valves, it

  • Jan07

    Grooved Flange Adapter — Grooved-to-Flange Conversion Fitting

    A grooved flange adapter gives grooved piping systems a direct bolt-up to flanged equipment. One end is roll-grooved or cut-grooved pipe interface — a circumferential groove machined to the grooving standard — and the other is a fully machined, drilled flange face. The adapter dr

  • Jan06

    Ductile Iron Flanged Eccentric Reducer – ASME B16.1 Pump Suction Fitting

    A flanged eccentric reducer is a bolt-on reducing fitting in which the two end centerlines are offset, so one side of the cone is flat while the other tapers. This one-sided geometry has a specific engineering purpose on horizontal lines, above all pump suction: installed **flat

  • Dec31

    Ductile Iron Flanged Reducing Tee – ANSI B16.1 Cast Fitting

    A ductile iron flanged reducing tee is a bolt-on three-way fitting whose two run ends and branch outlet are furnished with integral flanges, with the run reducing from a larger to a smaller diameter. It is the standard choice for above-ground transmission lines, pump stations, tr

  • Dec26

    Ductile Iron Reducing Cross – Threaded 4-Way Cast Fitting

    A reducing cross is a four-way fitting in which the two run outlets lie on one axis and the two branch outlets on the perpendicular axis, with one or both axes reduced to smaller diameters. Where a tee offers a single branch, the cross provides two 90° branch take-offs in one bod

  • Dec25

    Product Introduction: Bushing

    Material:Grey iron,Ductile iron Order:OEM according customers'drawings Castings:sand casting  Ductile Iron Pipe Fittings conform to ASME B16.3 dimensions. Bushings and couplings conform to ASM B16.14. The threads are NPT per ANSI/ASME B1.20.1. Ductile iron is ASTM A536 Class 65-45-12. All Ductile Iron Fittings are UL & ULC Listed and FM Approved.

0

nico@zyqfoundry.com

82b6bea3fa8b013700d5b8cb6263e9a
82b6bea3fa8b013700d5b8cb6263e9a

86-18561567088

86-18561567088