Qingdao Zhaoyuqi Machinery Co., Ltd.

  • Feb12

    Reducing Coupling — Cast Ductile Iron Threaded Reducer Coupling

    A reducing coupling solves a simple but constant problem in pipework: joining a large pipe to a smaller one while keeping the joint in a straight line. Instead of screwing a full-size coupling onto a separate reducer bushing, this single casting carries a large female thread on o

  • Feb10

    Fire Protection Butterfly Valve (Ductile Iron)

    A fire protection butterfly valve is the isolating valve installed on sprinkler risers, fire pump suction and discharge lines, and underground fire mains, allowing a section of the system to be shut off for testing, maintenance, or emergency control while the rest of the building

  • Feb08

    Threaded Mechanical Branch Tee – Cast Iron Branch Outlet Fitting

    A threaded mechanical branch tee is a mechanical-joint style tee used to create a branched take-off from a main line: the run passes full size through the body, while the branch outlet is provided with a machined threaded connection — NPT or BSP — onto which the branch valve, ser

  • Jan14

    Product Introduction:Check Valve

    Material:Grey iron,Ductile iron Order:OEM according customers'drawings Castings:sand casting Check Valve is a compact, cost effective valve, designed for use in grooved-end pipe fire protection systems and related equipment. Valves are to be used in conjunction with grooved pipe and pipe couplings that are listed or approved for fire protection systems.

  • Jan13

    Ductile Iron Concentric Reducer – Threaded Cast Pipe Reducer

    A concentric reducer is a reducing fitting in which both ends share a common centerline: the cone that connects the large end to the small end is symmetric, so flow decelerates or accelerates evenly around the circumference. This symmetric taper avoids the flow skew that an off-c

  • Jan09

    Ductile Iron Drain Elbow — Low-Point Drain-Off Fitting

    A drain elbow is a pipe fitting designed for the lowest points of a piping system, where the line must be emptied, flushed, or drained of condensate. In its most common form it is a 90° elbow whose body incorporates a drain outlet — a tapped boss or a female-threaded drain port o

0

nico@zyqfoundry.com

82b6bea3fa8b013700d5b8cb6263e9a
82b6bea3fa8b013700d5b8cb6263e9a

86-18561567088

86-18561567088