Qingdao Zhaoyuqi Machinery Co., Ltd.

  • Dec12

    Tri-Bundle Yoke Plate for Three-Conductor Bundle Assemblies

    A tri-bundle yoke plate is the load-distribution head of a three-conductor bundle suspension or tension assembly. Its three attachment bores are arranged in a triangular pattern, one per subconductor, all positioned on the same radius from the string axis so each subconductor han

  • Dec11

    Product Introduction:yoke plate, deltaⅡ

    Material:Grey iron,Ductile iron Order:OEM according customers'drawings Castings:sand casting These yoke plates may be used to bundle two conductors in suspension application with a single string of insulators. They also may be used in deadend applications with two strings of insulators and one deadend clamp. Type YPD may be furnished in a variety of sizes, hole spacings, and ultimate strengths. For yokes with corona ring mounting provision, consult factory.

  • Dec10

    Delta Yoke Plate — Triangular Three-Point Suspension Fitting

    A delta yoke plate is a triangular yoke fitting that distributes one insulator string's load across three attachment points. Where the crescent plate serves a two-conductor bundle on a flat curve, the delta plate's three corners form a triangular load triangle — used for V-string

  • Dec09

    Crescent Yoke Plate for Twin-Bundle Conductor Assemblies

    A crescent yoke plate is a curved, two-point yoke fitting installed at the bottom of a suspension or tension insulator string to hold a twin-bundle (two-conductor) assembly in balance. The crescent profile places two suspension clamp or spacer attachment points at equal radius fr

  • Dec03

    Y-Clevis Clevis — Fixed Adapter Link for Line Strings

    The y-clevis clevis is a short, fixed adapter link with two different terminations: one end is a Y-clevis — a forked jaw shaped to capture a ball or tongue fitting — and the other is a conventional clevis that pins to the next component in the string. Unlike the hot line link, it

  • Dec02

    Support Bracket — Cast Wall-Mounted Pipe Support

    A support bracket is a cast ductile iron arm or shelf that projects from a wall, column, or steelwork and carries a pipe, valve, or small equipment item on its top face. Typical sizes serve pipe lines from 1/2" through 24" nominal diameter (※), with rated loads set by bracket geo

0

nico@zyqfoundry.com

82b6bea3fa8b013700d5b8cb6263e9a
82b6bea3fa8b013700d5b8cb6263e9a

86-18561567088

86-18561567088