This page is the door to the foundry itself. Qingdao Zhaoyuqi Machinery has poured iron and cast steel in Jimo District, Qingdao since 2005, on three moulding routes, with machining and inspection in the same buildings. Buyers usually arrive here before they know which process fits — the pages below are short cuts to the two decisions that set everything else: which moulding route, and which iron.
The clay sand casting line is the volume route for 0.5 to 50 kg parts in repeat batches — hardware, fittings, supports, brackets. The precoated sand (shell) route takes over where walls run thin and surfaces must come out clean: valve bodies, water fittings, tapped hardware. The lost foam line handles roughly 50 to 200 kg with no parting line and no cores, which is what makes complex housings and bases affordable in medium batches. Route selection is a quotation-stage decision we make with you, on weight, wall, batch size and surface — not a default.
Grey iron to EN-GJL and ASTM A48 for damping and compression; ductile iron to EN-GJS and ASTM A536 for strength and impact, with nodularity above 90% verified heat by heat; malleable iron where thin sections and ductility must coexist; and cast steel — WCB-class carbon and low-alloy grades — where iron genuinely runs out of strength or temperature headroom. Grade certificates with chemistry and tensile values are issued per heat, and retention samples are kept so a batch can be re-examined years later.
Melting and moulding capacity across the three routes is about 10,000 tonnes per year. For a buyer that number matters less than its two consequences: repeat batches run on a 30-day cycle once a pattern is approved, and new parts — including tooling and a sample round — typically reach approved bulk in 6 to 8 weeks. Seasonal programs, like agricultural castings, are scheduled as campaigns so your season does not wait behind someone else's volume.
CNC turning, milling, drilling and tapping sit alongside the casting lines, so machining datums are agreed before the casting exists rather than negotiated after. Inspection runs from heat-wise chemistry and tensile through 100% visual and hardness checks to dimensional reports on first articles; NDT on steel castings is scoped to the standard you name. Every shipment carries its material certificate, and the foundry has held ISO 9001 certification since 2005, so the records behind them are organised, not reconstructed.
Most first orders start with a drawing and a quantity, and the reply carries three numbers: unit price, tooling cost if any, and sample lead time. If the part is a candidate for more than one route, the quote says which route we chose and why — that reasoning is usually where the savings are. The product pages in this category — cast iron castings in grey, ductile and malleable grades, ductile iron casting parts and custom iron casting parts — each show the route in action for a different kind of buyer.
Four items make a quotation answerable in one pass: a drawing in any common format, with the machined faces marked; the material grade or the service conditions so we can pick one; the annual quantity and the batch size you would actually release; and the coating, if any, plus the destination port. Missing pieces do not stop the quote — we assume and label the assumption — but each assumption adds a range where a number could have been. For replacement parts with no drawing, a sample works: measuring it and producing a drawing is part of the first-article process described on the custom casting pages.
Go by part, not by curiosity: if your part already has a process, read that process page and judge us on the detail. If it does not, the three process pages above each end with the same honest section — where that route is the wrong answer — and those sections are the fastest way to narrow your choice before you send a drawing.