![]()
Reducing Cross II is our designation for unequal-branch reducing crosses: four-way fittings in which the two branch outlets are deliberately different from each other, for example a 4"×4" run with 2" and 1½" branches on the same casting. Standard catalog crosses assume symmetric branches; many real systems do not. Distribution manifolds, plant air headers, sprinkler interconnections and pump-station suction manifolds often need two take-offs of different sizes from the same point of the main. Casting both branches into one ductile iron body — instead of welding a fabricated assembly or stacking adapters — gives a fitting that is aligned as-cast, pressure-tight without weld inspection, and faster to install.
Each cross is resin sand cast in ductile iron to ASTM A536 (65-45-12 / 80-55-06) or EN-GJS-400-15 / -450-10 / -500-7, with the internal waterway shaped by resin-bonded sand cores so all four passages blend smoothly into the junction. Branch sizes, thread standards (NPT to ASME B1.20.1 or BSP to ISO 228) and outlet styles are set by the pattern, which we cut in-house. Typical run sizes are 2"–12" with independent branch outlets ¾"–6". Hot-dip galvanizing and fusion-bonded epoxy are applied in our own finishing line for buried or corrosive duty.
| Item | Details |
|---|---|
| Material & Grade | Ductile iron ASTM A536 65-45-12 / 80-55-06; EN-GJS-400-15 / -450-10 / -500-7 |
| Standard | ASME B16.3 for threaded outlets; threads per ASME B1.20.1 (NPT) or ISO 228 (BSP); flanged runs per ASME B16.1 Class 125/250 on request |
| Configuration | 4-way, unequal branch outlets; reducing on run, branches or both |
| Size Combinations | Typical 3"×3"×2"×1", 4"×4"×2"×1½", 6"×6"×3"×2" — any combination to drawing |
| Pressure Rating | Typical 300 psi WOG for threaded configurations |
| Thread | NPT / BSPT / BSPP per outlet, independently specified |
| Weight Range | Approx. 2 – 70 kg depending on size |
| Casting Process | Resin sand casting with resin-bonded sand cores |
| Dimensional Tolerance | ISO 8062, typically CT10–CT12 |
| Surface | Machined self-color, hot-dip galvanized, FBE epoxy |
This is a build-to-drawing product: we review the outlet schedule, confirm wall thickness at the junction, then cut or modify the pattern and cores. First-article samples come with a full dimensional report, thread gauge records and material coupons for approval before mass casting; typical sampling lead time is 20–30 days for new patterns.
Batch inspection covers melt chemistry, ASTM A536 tensile and hardness coupons, core-assembled casting integrity (visual plus wall check at the four-way junction), independent thread gauging of each outlet, and ISO 8062 dimensional audit against the approved drawing. Quality management conforms to ISO 9001:2015 requirements. Outlets are plugged, fittings bagged and carton-packed, then palletized; larger crosses ship crated seaworthy.
Q1: What makes Cross II different from a standard reducing cross?
A standard cross has two identical branch outlets. Cross II carries two different branch sizes in one casting — the configuration required by unequal take-offs in manifolds and headers, produced to drawing rather than from a fixed size table.
Q2: Can one cross mix NPT and BSP threads on different outlets?
Yes. Each outlet is machined independently, so a run in NPT with BSP branches — useful for imported equipment connections — is a routine customization.
Q3: How do you verify a four-way casting is sound?
Beyond chemical and mechanical testing of the melt, we check wall thickness over the cored junction and inspect each core-formed passage; castings are traceable to heat/lot numbers from pouring through final inspection.
Email the four-outlet schedule or sketch — our foundry engineers confirm feasibility and quote within 24 hours. WhatsApp: +86 185 6156 7088. Pattern, casting, machining and coating handled by one factory team.
Need a formal quotation? Send your Reducing Cross II drawing, quantity and target price through our request for quotation form — it goes straight to the foundry inbox, and we reply with a priced offer, material certificate draft and production lead time within one business day.